Hi! According to the schematics, there are twp pushbuttons on the expansionboard, but I cant find them or any other reference to them. I actually only want to use the GPIOs that they use, so I dont need the buttons, but as ...

Hi After mounting the expansion board, are there any unused GPIOS on the J990 (or other connector) that can be used for interrupts. I am trying to ad a adxl345. Best regards Martin...

Hi I am excited about the expansion board GSM GPRS module. The module seems to have a TCP/IP stack under AT command set. Is there currently any support options in the kernel to allow seamless integration of this device as a dialup device...

Well, now I have worked with the board a little, so I think now I can (maybe ) understand some things that have been in my mind for...

Greetings, I need to get a fixed MAC address in order to install a IGEPv2 in a network from a client of mine. Until now, when it was the case with other products, i used to include in the board a 25A02E48, an EEPROM from Microchip that i...

Hi, I tried installing installing linaro on my sdcard but its not working on the igep v2 board, anytime i use the installation codes on terminal, it says it cant be found. what am i doing wrong......

Hello, i justed wanted to ask, up to which speed Class of Micro SD Cards can be used with the IGEPv2 Board. Right now i have a Micro SD Class 10 working, but Class 10 should deliver at least 10 MB/s read and write speed, and...

Hi guys, I wanted to ask, is there access to the 1.8V supply via J1 or J4 on the IGEP module? Similar to what\\\'s available on J5 pin 21 (VDDS_1. 8) ? I want to use it for a level translator. Thanks....

Hi I am trying to get started using the SDK provided and I am experiencing alot of problems and I guess that they are related to the virtual machine. For example, the keyboardlayout is messed up (non of the googleingtips works either) an...

Hello, I have an IGEPv2 RevB board booting on NAND, with a UBIFS file system, 2.6.33.6 kernel. I don\\\'t know why but I used to be able to see the system messages in the debug console with a previous file system or kernel. The only way ...

Hi Today I received my boards (yeay!) and I almost directly started by mounting the connectors that I order with them As one can read from the HW-manual, the IGEPv2 and expansion boards are joined by 5 connectors.

I have some questions about IGEP v2 with DM3730. When can I get information about weight, size, power consumption and requested power supply? I want to feed your board from the same Li-Pol battery, as BLDC motors. So is that board...

Hi, I\\\'m trying to connect a USB CDC device class to an IGEPv2 Board, but it doesn\\\'t work. The IGEPv2 is loaded with Linaro installed on Ubuntu. Kernel version is: root@localhost:~# uname -a Linux localhost.l...

Hi Using linux-2.6.35.y on a IGEPv2 RC3 board the kernel doesnt correctly detect the hardware revision and reports in bootlog: \\\"IGEP: Hardware Rev. B\\\" Btw: I\\\'m using CodeSourcery Toolchain arm-2010q1_ar...

Is it possible to install the SDK directly on a host machine (prefer Windows) instead of using the VMWare image? The VM runs slow on my computer and at 6GB, it takes a lot of space on a USB stick. If possible, where can I find instructio...

Hi I have got an issue with USB 2.0 high speed devices When I connect USB 2.0 storage high speed (480 Mb/s) device to IGEP USB port I’m getting it connected in full speed (12 Mb/s) instead of high speed. ...

Have you tested different brands of microSD? Is there any recommended? Once I had problems with a device, which was supposed to work with all types of microsd, but actually it didn\\\'t worked with the card we bought....

Hi Anyone 1stly let me say i am no linux guru so this well might be a simple problem. Board in question is igep0020. this seems to be the case with 3.3.1.7 and .8. It seems that once you have made t...

Greetings, I have a little issue when booting up in linaro. I have written a small script which makes the system sleep whenever it boots until a certain hour of the day, and then plays a video. Problem is, hwclock keeps the hour correctl...

Hello, I try to run an example (video copy )to my board (igepv2 omap3530), following the instructions \\\"build_instructions.html\\\". I modify the xdcpaths.mak file. I type gmake first for codecs then for servers and then for apps. After this ...