logo

Could not compile stylesheet for simplistic. Using last compiled stylesheet.

igep reboot

posted in IGEP COM MODULE
Friday, April 05 2013, 07:04 AM
0
Hello! There was the following problem: by means of gstreamer I give udp a flow to the computer with ubuntu.
I transfer video:
gst-launch-0.10 - gst-debug=2 v4l2src! ffmpegcolorspace! TIVidenc1 codecName=h264enc engineName=codecServer! rtph264pay pt=96! udpsink host=192.168.1.60 port=5000. 

On ubuntu I see video of seconds 5 and igep reboots. In attempt again to launch gstreamer igep directly reboots. The module is strongly heated. I delivered the heat sink. What can it be? I will be glad to any councils.

Accepted Answer

Monday, April 08 2013, 08:45 AM - #permalink
0
The USB OTG only can suplly 100mA, probably your camera needs more power, for this reason you should add a USB HUB.
The reply is currently minimized Show
Responses (5)
  • Accepted Answer

    Friday, April 05 2013, 09:55 AM - #permalink
    0
    Hello, Could you provide more information about what you are using ? Which processor board are your using IGEPv2, IGEP COMs ? What is connected to the board ? Which power supply are you using ?
    The reply is currently minimized Show
  • Accepted Answer

    Monday, April 08 2013, 06:43 AM - #permalink
    0
    Hello! Thanks for the response. igep commodule. The matter is that the debug board is faulty. problem with a supply circuit. there was to return on repair neither time, nor opportunity. to a board it is connected through miniusb otg and through hub USB webcamera. next day I included - didn't reboot any more. business was unclear in what. CPU loading about 25%. Most likely a supply doesn't suffice.
    The reply is currently minimized Show
  • Accepted Answer

    Monday, April 08 2013, 06:46 AM - #permalink
    0
    Still question: the debug board can work with USB cameras only through hub? Thanks.
    The reply is currently minimized Show
  • Accepted Answer

    Monday, April 08 2013, 01:31 PM - #permalink
    0
    Many thanks for the response. Whether provided that with a supply everything will be normal the USB camera without a hub will work? or surely to work through USB a hub?
    The reply is currently minimized Show
  • Accepted Answer

    Thursday, April 11 2013, 10:13 AM - #permalink
    0
    If you want to connect the camera to the USB OTG probably you should use a USB HUB.
    The reply is currently minimized Show
Your Reply

SUPPORT


This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
IGEP Community Wiki
IGEP Community Forum
IGEP Community Online Chat