Could not compile stylesheet for simplistic. Using last compiled stylesheet.
Featured Topics
-
Java benchmarks of IGEP Technology devices
Announcementposted in AnnouncementsHi Community, We added a JAVA benchmark comparison in our wiki page, please be free to comment here ... ...
-
Procedure to enable 4G RAM on IGEPv5 with recent kernels ?
Questionposted in IGEPv5 Community Edition - Support ForumHi, I didn't use my IGEPv5 for a while. In the past, I had 4G RAM working with a recompiled MLO and uboot. A recent kernel work fine with 2G RAM, but when I recompile that same kernel with LPAE support, the boot hangs. ... -
gpio157 not accessible
Questionposted in IGEPv2Good Morning I am trying to use 10 gpio's with direction = "out" for an HD44780 character display attached to J990 of my igepv2. Specifically gpios: 136,137,138,139,156,157,158,161,162. All work in a blink-led test exc... -
-
Linux Kernel Information
posted in Uncategorized[ul]Linux Kernel Main Website Linux Device Drivers, Third Edition -
gpio question
Questionposted in IGEPv2I own a J990 without wifi. I am trying to access as many of the GPIOs as is possible. in running through the echo to direction and echo to value permutitions I ran into several GPIO pins that either do not work as intended or don't work ... -
UART
posted in UncategorizedHi I am trying to use the second UART on the J960 connectors, but the manual only provides these informations: 1. Modify your kernel: a. On file board-igep0020.c b. On function static void __init igep2_init(void) c. Af... -
CCDC won't become idle
posted in IGEP COM MODULEHi, We have got some problems with the igep module with 2.3.37.7 kernel version. Our camera could b be remove during the igep is running. But We have this defaut : CCDC won't become idle and sometimes the omap3-isp is crashed. We ... -
wilink8, 2.6.37
Questionposted in ISEE: Questions, Suggestions, DoubtsHi to all! I have a lot igep com modules (dm3730 proccessor): I use isee linux with kernel 2.6.37, arm-poky cross compiler. When i build linux kernel (for igep_wilink8_defconfig, instruction from: -
image needed which support TI codecs-gstreamer and wifi-bluetooth
posted in IGEPv2Hi, We are working with IGEPV2 board with expansion board. Current yocto image doesnt support gstreamer with TI Codecs actually I didnt find. "gst-inspect | grep TI" returns nothing also there is no support for v4l2src. We need a image t... -
Battery supported
posted in PeripheralsWhat type battery can be connected to the board? Can you put a link? Thanks.... -
Problem start Igep
Issueposted in ISEE: Questions, Suggestions, DoubtsHello, I am new on this forum and I have a problem with two igep model 0030 rf module. One Igep is all time with led green and red lights and other is with led green lights. Both do not boot and I cannot use a sdcard for boot because it doesn't works... -
Is it possible to get an updated omap5-igep0050.dts please ?
Questionposted in IGEPv5Hi ! I used diff to adapt omap5-igep0050.dts to newer kernels and finally succeeded to build some omap5-igep0050.dtb. After various build attempts, it seems no one is working :-( . I'm pretty sure I'm making tri... -
SOLVED Android NDK
posted in UncategorizedHi, In order to use the NDK provided by Android (http://developer.android.com/sdk/ndk/index.html) do I have to compile the sources with the toolchain you provi... -
IGEP module sdcard
posted in UncategorizedHi, I am interested in loading a linux version on a SD card and boot my IGEP module from it. I have searched the net and followed the procedures for installing Linaro, Angstrong and Maverik but I didn´t managed to install any of... -
Is it possible to boot from a single partition SD card ?
Questionposted in IGEPv5Hi ! I noticed the Ubuntu SD image is made of two partitions : One FAT32 for /boot One EXT3 for / Is it possible to use only one EXT3 partition ? Do I have to change the initrd (/etc/fstab is empty) ?... -
No login via nfs possible
posted in UncategorizedHi, I build an ubuntu 9.10 filesystem with user \"bernhard\". When I start my board with NFS, I am not able to login. When I try to use the user \"bernhard\", the system doesnt show up a line to enter the passwort. Th... -
Wilink8 panic and hardware issues in dmesg
posted in IGEPv2Hello, On some IGEPv2-RF boards, it is not possible to connect on configured WiFi AP with hostapd, and following some retries, it ends on issues in dmesg like panic and hardware errors (full dmesg log attached). ... [ 1277.29... -
wlan0 not ready at startup on latest firmware
posted in UncategorizedI have a RC6 board. When booting from sd with latest firmware, wlan works ok. After flashing the board and booting from flash, wlan does not start. Is this a known problem? Thank you.... -
IGEP wilink8 module
Questionposted in Linux KernelHi, To use new IGEP board : Module Compact wireless wilink8.0 Linux omap 2.6.37.12 Tool chain : arm-arago-linux-gnueabi Use by default : igep00x0_wilink8_defconfig (see attachment file) when i run mak... -
QT-SGX Compile for igepv2
posted in IGEPv2Hi, How can I compile qt4 embedded with opengl support for igepv2 on framebuffer? Could you give sample of qt compile options and sgx compile with igepv2 sdk? Umit....
- Total Posts: 1465
- Total Resolved Posts: 225
- Total Unresolved Posts: 1243
- Total Users: 7522
- Latest Member: gysyxety
- Online Users: 27 other guests