Written by Super User on 26 June 2018. Posted in processor-boards.

IGEPv5 OMAP5432

PRODUCT BRIEF

PRODUCT DATASHEET

WIKI PAGE

Based on the ARM cortex-A15 Technology Processor board DUAL-core ARM Cortex-A15 up to 1,5 GHz The IGEPv5 OMAP5432 is an embedded processor development board based on Texas Instruments OMAP5432 Multimedia Application Device and up to 4 GB DDR3 RAM. This board is designed to evaluate performance and features for advanced industrial applications. It supports expandability via onboard connectors. .

FEATURES

Texas Instruments OMAP5432 CPU: 2 x ARM Cortex-A15 Frequency: Up to 1,5 GHz NEON SIMD Co-processor + VFPv4 DSP: TMS320DMC64X Low Power co-processor: 2 x Cortex-M4 @ 200 MHz

RAM: Up to 4 GB DDR3 Flash: 8 GB eMMC EEPROM: 32 Kb Onboard micro-SD card socket

2D GC320 Core from Vivante® Corp Graphics Accelerator 2D/3D Dual Core POWERVR SGX544 Graphics Accelerator Support: OpenGL ES 1.1/2.0, OpenVG 1.1, OpenCL EP, OpenWF, DirectFB, GDI/DirectDraw, Adobe Flash

Encode: H.264, H.263, MPEG-4, MPEG-2, JPEG, DivX 5.x, RealVideo 10 and WMV9/VC-1 up to 1080 i/p @ 60 fps Decode: H.264, H.263, MPEG4(SP), JPEG, DivX 5.x, RealVideo 10 and WMV9/VC-1 up to 1080 i/p @ 60 fps

1 x MIPI CSI interface (5 lanes) 1 x CPI interface (16 bits)

HDMI 1.4a (with audio), micro HDMI connector 2 x MIPI DSI (5 lanes) 24-bit Parallel Display Interface

3 x I2S / McBSP / SSI

1 x Audio Headset 1 x Microphone IN 1 x Line OUT 1 x Auxiliary OUT

Ethernet: 10/100/1000 Mbps WiFi: Certified 802.11 b/g/n (Access Point: Yes) Bluetooth: 4.2 + BLE

Internal WiFi/Bluetooth antenna U.FL connector for external antenna

4 x USB 2.0 Host 1 x USB 3.0 OTG

5 x I2C 1 x MMC 2 x SPI 30 x GPIO 7 x PWM 5 x UART 1 x RTC battery 1 x SATA II

Linux Kernel 4.9 Distributions: Ubuntu 16.04, Yocto 2.3, Debian

Power Input from jack connector: 5 V

Industrial temperature: -40ºC to +80ºC

135,00 mm x 95,00 mm

DOWNLOADS

Hardware Reference Manual 1.0

Hardware Specification 1.1

IGEPv2 DM3730

PRODUCT BRIEF

PRODUCT DATASHEET

WIKI PAGE

Based on the ARM Cortex-A8 technology Processor board SINGLE-core ARM Cortex-A8 up to 1000 MHz The IGEPv2 DM3730 is an industrial processor board. It unleashes laptop-like performance and expandability without the bulk, expense or noise of typical desktop machines and is the perfect solution for many industrial applications or system requirements.

FEATURES

Texas Instruments DM3730 CPU: ARM Cortex-A9 Frequency: 1 GHz NEON SIMD Co-processor DSP: TMS320C64+ @800 MHz Low Power co-processor: 2 x Cortex-M4 @ 200 MHz

RAM: 512 MB DDR Flash: 512 MB EEPROM: 32 Kb Onboard micro-SD card socket

GPU & VPU: PowerVR SGX 530 Support: OpenGL ES 1.0, OpenGL ES 2.0, OpenVG 1.0

Video acceleration: H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional codecs. Video encoder/decoder up to 720p

1 x CPI interface (12 bits)

1 x DVI-D/HDMI Resolution 2048x2048 – 48 bits

1 x I2S / McBSP / SSI

1 x Stereo Line Audio In 1 x Stereo Line Audio Out

Ethernet: 10/100 Mbps WiFi: Certified 802.11 b/g/n (Access Point: Yes) Bluetooth: 4.2 + BLE

Internal WiFi/Bluetooth antenna U.FL connector for external antenna

1 x USB 2.0 Host 1 x USB 2.0 OTG

2 x I2C 1 x MMC (1) (1) Only in No WiFi versions. 3 x SPI 39 x GPIO (2) (2) Maximum number of GPIO 1 x PWM 3 x UART (3) (3) RS232 and RS485 interfaces available. 1 x I2C

Linux Kernel 4.9 Distributions: Ubuntu 16.04, Yocto 2.3, Debian

Power from expansion connectors: 5 V Power from JST connector: 5 V Power from jack power: 5 V

Typical 2,2 W (4) Maximum 2,8 W (4) (4) Depending on software.

Industrial temperature: -40ºC to +80ºC

95,00 mm x 65,00 mm

DOWNLOADS

Software User Manual 2.2

Datasheet 1.0

Hardware Reference Manual RCx 2.0

Hardware Reference Manual RFx 4.0

Software Reference Manual 1.0

Framework 3.40.00

1.2.2-3

1.2.2-6

Yocto Toolchain 1.2.2-3

2.0 - 20120725

20140301

Android Froyo 2.2 DM3730

Android Froyo 2.2 OMAP3530

Mechanical Pinout R14 DWG 1.0

Mechanical Pinout R14 DXF 1.0

Schematics 20110311

Mechanical Pinout STEP 1.0

2012.12.01

Mechanical Pinout R14 DXF 1.0

Schematics 20110311

Processor Boards

Premium embedded computers for industries. PC-like performance for industrial systems in small, low power consumption, fanless processor boards.

The Processor Boards are Single-Board Computers (SBC): a complete computer with all connectors which allows a standalone functioning with no need of a Carrier Board as in the case of COM boards. These have also available expansion pins to use other interfaces and peripherals without its own connector.

In them is included a complete Operating System, so the user only needs to enter the final application to power on his project.

Thanks to their low power consumption and being not necessary development of complex Carrier Boards, makes this a perfect choice for a fast implementation of powerful projects in a very reduced time to market and with low development costs.

IGEPV5 OMAP5432

PROCESSOR BOARD DUAL-CORE ARM CORTEX-A15 UP TO 1500 MHz

IGEPv5 is an embedded processor development board based on Texas Instruments’ OMAP5432 Multimedia Application Device and up to 4 GB DDR3 RAM. Designed to evaluate performance and features for advanced industrial applications. Expandability supported via onboard connectors.

MORE INFO

IGEPV2 DM3730

PROCESSOR BOARD SINGLE-CORE ARM CORTEX-A8 UP TO 1000 MHz

IGEPv2 is an industrial processor board. It unleashes laptop-like performance and expandability without the bulk, expense or noise of typical desktop machines and is the perfect solution for many industrial applications or system requirements.

MORE INFO

IF YOU CAN DREAM IT, WE CAN MAKE IT HAPPEN

IGEPv5 OMAP5432

IGEPv2 DM3730

Processor Boards

Processor Boards

IGEPV5 OMAP5432

IGEPV2 DM3730

IF YOU CAN DREAM IT, WE CAN MAKE IT HAPPEN

PRODUCTS

SERVICES

SUPPORT

CONTACT US